Warning
This instruction can be used only for SONY Tablet S. If you decide to repeat the sequence of actions on the phone the other models, it may lead to the withdrawal of its failure or other negative consequences. You have to take responsibility for those actions that can occur to your phone before you start the program the device. Besides changing the status of root-rights will lead to cessation of the guarantees given to you by the manufacturer of the model plate.
1) Prior to the start of installation, you must do the following:
- Be sure to make a copy of all data that carry personal information on your phone (contacts necessarily be copied, all sent and received SMS, MMS, as well as individual Internet settings, password access to Wi-Fi and other important information). There is a possibility that this will remove the data;
- Perform a full charge the battery SONY Sony Tablet S. The minimum value of the battery level readings should not be less than 90%;
- Download the file to a folder on Sony_Tablet_S_Root_Windows.zip PC;
- Start the debug mode USB. To do this, go to the address Settings / Applications / Development / USB Debugging and follow the steps;
- Track to Android Debug Bridge (ADB) has been installed on your computer. It can be obtained by downloading and installing the Android SDK from
this site;
2) Instructions for installation:
- Download the file and save Sony_Tablet_S_Root_Windows.zip in a specially created folder;
- Extract information from the archive to the folder;
- Connect the tablet to a PC in the status of ADB;
- To do this, run the following commands and actions: Computers
• Make the USB debugging on your tablet;
• Set the device description for this section [Google.NTx86] and [Google.NTamd64] in extras \ google \ usb_driver \ android_winusb.inf, SONY Sony Tablet S, %% CompositeAdbInterface = USB_Install, USB \ VID_054C and PID_05B4 & MI_01
• list the command in 0x54c .android / adb_usb.ini file in the root directory using this command from the command line.
echo 0x54c >>% HOMEPATH% \. android \ adb_usb.ini
• In your PC, which broke up the file, run the run.bat file and start the update process.
• You open a command prompt where you can see the progress of the process;
- Restart your tablet, after the program you get root-rights.
If you have done all of the proposed algorithm of actions and in accordance with the instructions and all went well, you get all the possible root-rights Phone - SONY Sony Tablet S.