Post 1 : How to unlock bootloader , flash a Recovery and Root Guide
Post 2 : How to Install a Custom Rom and its corresponding Kernel ( boot.img )
Post 3 : How to restore everything to its original state
Post 4 : How to flash a Rom by ADB sideload
How to unlock bootloader , flash a Recovery and Root Guide
- Recommend unzip to a directory C: Make sure the folder name does not contain spaces or Points
One - Run the program X + . Exe
- On your phone, turn on USB Debugging option
- In the toolkit , press 1 . Install HTC Drivers. This installs the drivers . Restart the pc .
- After reboot , open the Toolkit, and plug the phone or pc . Should recognize the PC.
2 - Click on "Register at HTCDev " . Place a correct email address , because you'll need it later . Leave the page open .
- In the Commands section , click Boot into Bootloader . Blank screen should appear with the text " FASTBOOT USB"
Click on - 3, " Get Token ID". A screen in which you must copy that opens Chorrón numbers , included the initial and final text <<<< Identifier Token Start >>>> (here the numbers Chorrón ) >>>> <<<<< Identifier Token End >
- Click on 4 Submit Token ID . The browser opens , and the bottom will have a blank space where Chorrón paste the above numbers. You give HTC you will send and get you ( instantly ) A ficherito to the email address you put above.
- With the phone in bootloader mode ( as we left ) , download the file that HTC has commanded you and save it in a safe place . Press 5 " Unlock Bootloader " and indicates where the file " unlock_code.bin " that is saved .
WARNING WARNING : THIS WILL ERASE ALL DATA FROM YOUR PHONE . WARRANTY AND CAN BE TOUCHED ( OR MISSING ) .
- If you agree with that, go up and down with the volume keys and accepts endender button . This will reset the phone.
- When you turn , you'll have to go through all the initial setup of the phone. Go to settings and enable USB debugging again . The PC will recognize the phone.
- In the Extras section of the Toolkit, click Root Perm . That copy SuperSu.zip on the phone .
Now for the Recovery :
The best by far for the Hox + is the TWRP . There are two versions , ATT / Telus and International. And both are included in the kit.
If you purchased the terminal to ATT or Telus , use the ATT / Telus
If you have not purchased the terminal ATT / Telus uses the International
- Select the appropriate choice and click " Flash Recovery"
- After installed , disconnect the USB cable and having the bootloader HBOOT selected , hit the power button to select it . That will take you to another window where you can select ( with telcas of volume) Recovery and press power to select.
- Go to Backup and click Backup your current original Rom (boot and system) . Very important to do this before flashing any Rom . And then from the pc , copy that backup to your pc . You'll never know when you need it ! With no SD card, it is much easier to accidentally erase all internal phone storage, and backup ROMS ROM included ..
- Go to Install and locate the file that you copied before SuperSu.zip the toolkit. Select it and slide the button below to flash it . Once done, the phone restarts.
- Go to SuperSU application. If it says " binary" should be updated , do it. If not , you're rooteado !