How to unlock bootloader, flash a Recovery and make Root
-Download Toolkit that will help us in all operations.
-Recomiendan Unzip it to a directory C: Make sure the folder name does not contain spaces or Points
One program -Ejecuta X + exe
'In the phone enable USB Debugging option
'In the toolkit, press 1 Install HTC Drivers. This installs the drivers. Restart the pc.
-After the reboot, open the Toolkit, and plug the phone to the pc. Should recognize the PC.
-Press In 2 "at HTCDev Register". Put a correct email address, because then you'll need. Leave the page open.
'In the Commands section, click Boot into Bootloader. Blank screen with the text "FASTBOOT USB" will appear
-Click In 3, "Get Token ID". A screen in which you need to copy that Chorrón number opens, included the initial and final text <<<<Identifier Token Start>>>> (here Chorrón numbers) <<<<<Identifier Token End>>>> >
-Click In 4 Submit Token ID. The browser opens, and the bottom will have a blank space where Chorrón paste the above numbers. You hit send and HTC will get you (instantly) A small file to the email address you previously put.
-Being The phone in bootloader mode (as we had left it), download the file that HTC has commanded you and keep it safe. Press 5 "Unlock Bootloader" and indicates where the file "unlock_code.bin" that is saved.
ATTENTION ATTENTION: THIS ERASE ALL DATA FROM YOUR PHONE. AND WARRANTY MAY BE TOUCHED (OR MISSING).
If you agree with that, go up and down with the volume keys, and agree with endender button. This will restart the phone.
-At power on, all have to go through the initial setup of the phone. Go to settings and enable USB debugging again. The PC will recognize the phone.
'In the Extras section of the Toolkit, click Perm Root. That copy SuperSu.zip on the phone.
Now for the Recovery:
The best by far for the Hox + is the TWRP. There are two versions, ATT / Telus and International. And both are included in the kit.
If you purchased the terminal or ATT Telus uses the ATT / Telus
If you have not bought the terminal ATT / Telus uses the International
-selects Corresponding and click on "Flash Recovery"
-After Installed, disconnect the USB cable and having selected the HBOOT bootloader, hit the power button to selecionarlo. That will take you to another window where you can select (with telcas of volume) Recovery and press power to select.
Go and click Backup and backup your current original Rom (boot and system). Very important to do this before flashing any Rom. And then from the pc, copy that backup to your pc. You never know when you'll need it to !! By failing SD card, it is much easier deleted by mistake all internal phone storage, and backup ROMS ROM included ..
Go and Install and locate the file that you copied before SuperSu.zip the toolkit. Select it and slide the button to flash it. Once done, restart your phone.
Go into the SuperSU application. If it says "binary" should be updated, do it. If you are not already rooted !!