How to Tell Bootloader?

Question

How to Tell el Bootloader?

 

hello 

 

am holding an iphone week 47! almost certainly is a 4.6 but not keria and confirm. 

 

as you can see the bootloader? 

 

thanks 

 

Answer 1

If the firmware is 1.1.2 factory you can be sure that 99.99% of the bootloader is 4.6.

Answer 2

Thanks osky! 

 

Since tb is curious and learn a little more of these wonderous "equipment" 

 

 

 

PS: If anyone knows the method to know physically I appreciate!

Answer 3

You can do so :

With the installer you install the Mobile Terminal ( console terminal )

You must have also installed the BSD Subsystem and OpenSSH.

After you copy the bbupdater to your / usr / bin in the iphone either through WinSCP or iBrickr , depending if you use Win or Mac You can find it here

Remember to give execute permissions bbupdater

Once all set , run the terminal and type :

 

1 - . Launchctl unload- w / System / Library / LaunchDaemons / com.apple.CommCenter.plist

. 2 - cd / usr / bin ( this disables the CommCenter )

2b - . Bbupdater chmod + x (this only put it if you had not given execute permissions to bbupdater , if you did not required)

3 - . Bbupdater - v

 

Now you will information baseband and bootloader , for example if you have 1.1.2 native will ...

 

Resetting target ...

pinging the baseband ...

Issuing + xgendata ...

firmware : DEV_ICE_MODEM_04.02.13_G

eep version: EEP_VERSION : 208

eep revision: EEP_REVISION : 1

bootloader : BOOTLOADER_VERSION : 4.6_M3S2

 

Then you have to start again CommCenter by typing:

. 4 - launchctl load- w / System / Library / LaunchDaemons / com.apple.CommCenter.plist

cd / usr / bin

 

And ready

Answer 4

Thanks friend for the info but I have doubts pq not miss me. 

 

1 - I do not get the mobile terminal in the instaler ... that source is? 

 

2 - The bbupdater where I find? 

Answer 5

I put the link in the previous post bbupdater: P 

The terminal, in my installer is called "Term-vt100"

Answer 6

I have a question when you already give the last pasao this gives me an error like this k 

 

"zsh: noformader match-o file: bbupdater" it can be? 

 

and when I lower the file bbupdater recorded it as txt me, is how I have to put in the iphone? 

 

Answer 7

ogin as: root 

[email protected] 's password: 

Last login: Fri November 30 2007 00:58:16 from 192.168.1.60 

# Launchctl unload-w / System / Library / LaunchDaemons / com.apple.CommCenter.plist 

# Cd / usr / bin 

# Bbupdater-v 

Resetting target ... 

pinging the baseband ... 

Issuing + xgendata ... 

firmware: DEV_ICE_MODEM_04.02.13_G 

eep version: EEP_VERSION: 208 

eep revision: EEP_REVISION: 1 

bootloader: BOOTLOADER_VERSION: 4.6_M3S2 

Done